Creating a Man Cave – DIY

Who doesn’t need his own space? What better place to make into your man cave than a garage?

We will show you how to turn what is probably already your own territory into a place where you can hide or go for some peace and quiet. A room that will help you decompress and just chill. This particular garage-turned-man cave is one that was done from up to bottom.

Laying a Subfloor

The first step after clearing out the garage space that you’re going to turn into your man cave is to lay the subfloor. 

Frame the Walls​

Next, you’ll need to be sure that you frame the walls so that you can add insulation. This will help with weather-related hot and cold. In addition, it will help with sound-proofing your man cave, depending on what you’ll be having in the “cave”. 

Insulate the Walls

Again, adding insulation is key to making your room warm in winter and cool in the hotter months. In addition to keeping a nice temperature, insulation will help with sound-proofing the room.

Add Electric​ To Your Man Cave

Clearly, if your garage doesn’t have electricity run to code, you need to be sure your run enough electric to have outlets at least on every wall. You’ll additionally want to make sure you run sufficient to have sufficient lights for whatever it is you’re going to require illumination for.

Adding Drywall

Now it’s time to start really making this look the man cave you’ve always wanted. You will need to add drywall to the walls. Drywall comes in 4×8 pieces, so measure the room and get what you’ll need. Remember to measure the ceiling.

Mudding the Drywall

This time, you’ll need to mud all of it. Again, this is something that can be done alone, but if you are unable to perform into this section, then you should get assistance from an expert – someone who has done this before. You have to sand and mud, sand and mud. Be sure you have to know what you’re doing.​

Painting Your Man Cave

First, you will need to get a primer- white primer. After the drywall mud is completely dry, you are ready to prime and paint the walls. Priming aids you need to repaint fewer layers on the walls. The drywall has a tendency to suck up the paint. Adding a guide first will conserve your money and time.


How to Repair Stucco, DIY Tips

Stucco is an important and popular building material that’s been used in the construction of buildings nowadays. It is created of an aggregate, binder, and water which is applied wet and hardens to a solid form. Buildings or homes that are applied with stucco can last for a hundred years if stucco is applied in the right way. If you already noticed a crack then you should immediately fix the damage before it collapses.

Stucco repair is easier than matching and colors. As long as you follow the right yips or guides and take into consideration the important facts then you can easily make the repair job properly.

Step-1

You should check to be ensured about how the stucco is applied since the stucco application is usually done in different ways. 

Step-2

This time, you should check the direction of the crack and the extent of the damage. It would be better to consult a foundation expert to see if there might be a problem with the foundation. It is imperative to do other necessary repairs (if found) on the building or home before the stucco repair. Most of the stucco damage is caused by the infiltration of water into the building through the roof, chimney or any opening where excess water can pass. 

Step-3

After finding the damage, you should determine what stucco repair needs to be done. If the stucco crack is much less than 1/8 inch wide then you can spot it up with a siliconized acrylic caulk at two different periods. The 2nd coating needs to be done numerous days after the initial to make sure it is currently dry. For larger fractures, you need to use the concrete stucco combination you created. If you are unable to carry out stucco repair you need to employ a professional to do the job.

Also, in performing the stucco repair, you should not do it on a sunny day because when the stucco quickly dries up it is not as durable as you would want it to be. Another thing is to make sure to wet the edges of the existing stucco before patching up and applying a new coat. Whitewashing stucco makes the stucco more durable.

However, stucco repair is easy as long as you have enough knowledge in doing it and got the patient to wait for the right time to do the second or final coating. Consider all the tips mentioned above for it can definitely help you perform the stucco repair the right way.


How to patch a roof leak from inside

Step 1 – Seal the Leak

  • Locate the source of the leak by examining the underside of the roof from within your attic or crawl space.
  • Shine a flashlight along the underside of the roof and look for a hole in the roof as well as areas that are wet or have been darkened by moisture.
  • Mark the areas that appear to be leaks with chalk so they will be easier to find later when making a permanent repair.
  • Let the wet areas dry and then apply the patch to the underside of the roof with a putty knife. Use enough of the roof patch to liberally cover the leaky area.
  • Use a caulking gun to apply caulk to seal any holes that appear in the roof. Use the putty knife or your finger to spread the caulk around to cover the hole.

Step 2 – Divert the Water

  • Insert a nail in the hole where water is leaking through the roof. The nail will provide a path for the water.
  • Place a bucket underneath the nail to catch the water as it runs down the nail.
  • Patch the hole from the inside as soon as the area is dry enough for the caulk or roof patch to be applied.

Do I Need a Roofing Estimate or a Roof Inspection?

Many homeowners across the United States never get to understand the difference between a roofing estimate and a roof inspection. It’s not just about hiring a roofing contractor or accepting a free estimate from a roofer. You need to ask yourself which of the two do you need. That means you need to be aware of the kind of roof damage you’re dealing with at any given point. For instance, if you’re dealing with missing shingles or a roof leak, you may need to request for a roofing estimate so you can know the cost of fixing the problem. 

So, what’s an estimate? Probably you already have an idea. An estimate is what informs you on the amount of money you’re required to spend for specific roofing problem. Be sure that includes a breakdown of the cost of labor and materials, as well as the time needed to accomplish the task. Avoid anything that’s not specific. 

A roofing inspection, on the other hand, is what a homeowner needs when he wants the condition of his or her roof examined. The roofing contractor, in this case, will come and examine your roof, checking for any issues that require fixing. It may also involve predicting time your roof can last before you can replace it with a new one. 

Roofing inspections are often free, but a roof inspection will cost you some money. During an inspection, consider asking your roofing contractor to identify areas that need repair and, if possible, specify the lifespan of your roof. 

What should you expect During a Professional Roof Inspection?

The National Roofing Contractors Association recommends or rather suggests that homeowners should have their roofs inspected in spring and fall. Your roof might be the strongest or the most resistant and durable, but it may still have some weaknesses. To ensure it serves you for its entire lifespan, you need to maintain it throughout the year. Roof maintenance involves inspecting for roof problems and fixing them before they cause more damage and become more costly. 

Hiring a roofing professional to inspect your roof at least twice a year will help you detect any problems and have them fixed. It’s the best way to prevent any structural damage to your roofing system and home. Professional roof inspection includes:

  • A Complete interior roof inspection. This involves checking for moisture and mold, proper ventilation, and insulation in the attic. 
  • A full exterior inspection which includes checking for roof leaks, ice dams, chimney work, proper flashing, and the condition of your roof shingles. 
  • A course of action in case there’s a roof problem to be fixed
  • A detailed estimate with recommendations on what should be done.

If your home has signs of water damage on the ceiling or your shingles look deteriorated, it’s time to contact a licensed roofing professional to have your roof inspected. Other sings may include a sagging roof deck and rot and mold on your roof. 

The only way you can know or rather discover potential problems in your roofing system and prevent major damage, in the long run, is through roof inspections. However, if you’re certain your home needs a new roof, you don’t have to worry about a roof inspection. Simply contact a licensed and bonded roofing contractor and request for an estimate to find out the cost of a new roof or repairs.